"Protecting your investment" with
Knockoff Spinner Tool Kits
Available for most 2 and 3 eared knockoff spinner nuts
Each Kit will come with a knockoff tool, one inch socket, a hard rubber wheel wedge and a burlap bag to keep everything organized with the car.
Sarto Rocheleau
PO Box 477
Cotati, CA 94931
United States
ph: 707-481-6700
fax:
alt:
sarto477
Purchase a Tool -- Credit cards are now Accepted See below
The Lotus Elan tool fits the three eared spinners that are unique to the Elans.
The 42mm two eared spinner version for wire wheels, fits early Cobras, Morgans, Triumphs, MGs, Austin Healeys, Lotus Elites and many others that use the 42mm size.
The 52mm Two Eared version fits wire wheels for Jaguar and Austin Martin.
Cobra and GT40 and others that use the Halibrand three eared type spinners will fit this tool. Check the instruction for proper measurement before ordering.
Each Tool comes with a one inch socket that fits on the Hex shaft of the tool for those that use MM.
Remember to order from the USA or International shipping addresses to have the total cost included in the purchase price.
Lotus Elan Three Eared Tool Kit Use this "BUY NOW" for USA purchases
Shipping & handling fees in the USA add $14.00
- $
- In stock
Lotus Elan Three Eared Tool kit Use this "BUY NOW" for International purchases
International shipping & handling cost add $42.00 USD
- $
- In stock
Sold Out 42mm Two Eared Wire Wheel Tool kit Use this "BUY NOW" for USA purchases
Shipping & handling fees in the USA add $14.00
- $
- Not in stock
- $
Sold Out 42mm Two Eared Wire Wheel Tool kit Use this "Buy Now" for International purchases
International shipping & handling cost add $46.00 USD
- $
- Not in stock
- $
Sold Out 52mm Two Eared Wire Wheel Tool kit Use this "buy now" for USA purchses
SHIPPING FEES In the USA is $14.00
- $
- Not in stock
- $
Sold Out 52mm Two Eared Wire Wheel Tool kit Use this "buy now" for International purchses
International shipping & handling cost add $46.00 USD
- $
- Not in stock
- $
Cobra / GT40 -- 3 eared Halibrand Style Tool Kit
Shipping & handling fees in the USA add $14.00
- $
- In stock
Cobra / GT40 - 3 eared Halibrand Style Tool Kit Use this "buy now" for International purchases
International shipping & handling add $46.00
- $
- In stock
Replacement leathers for the Lotus Elan tool
Leather pads are pre-torque to the shape of the Elan spinners and includes the Brass machine screws and acorn cap nuts
The leather also now comes in black with chrome nuts
Free mailing- $
- In stock
These Knockoff Spinner Tools are made in the USA and are made so they do not damage any part of your investment with a hammer.
The tools apply equal force to all ears at the same time, not just one ear at a time with a hammer.
Feel free to contact me with any questions about the tools and how they may fits your spinners.
sarto477@yahoo.com or 707-481-6700
A complete kit
Fits Halibrand spinners
The new improved tool is now powder coated
This is a complete kit for the halibrand tool, socket, a wheel wedge and a burlap bag.
Deep set wheels, Its hard to get a good swing to break the spinners loose with a hommer
Rarely needed but available. Can be easily replaced by a local leather shop
Sarto Rocheleau
PO Box 477
Cotati, CA 94931
United States
ph: 707-481-6700
fax:
alt:
sarto477